Used Sunrise IW100S Punch And Shear
The Used Sunrise IW100S Punch And Shear have two control foot pedals, & separate operations can be safely performed simultaneously without interference. The low pressure setting for tool change provides maximum operation safety. The long punching cylinder stroke & deep throat enable mounting a wide range of special equipment.
Used Sunrise IW100S Punch And Shear
Used Sunrise IW100S Punch And Shear
Description
The double cylinder “S/SD” series are in the Sunrise tradition of well engineered ironworkers built for high power, quality, & reliability. These ironworkers have two control foot pedals, & separate operations can be safely performed simultaneously without interference. The low pressure setting for tool change provides maximum operation safety. The long punching cylinder stroke & deep throat enable mounting a wide range of special equipment. The large punching base with the “T-slot” fixing provide a solid base for securing the punching tooling, as well as a wide range of optional & custom designed tooling.
PUNCHING
- Large hole punching up to Ø50mm as standard
- Overhang bolster for punching channel & beam flanges
- Large ruled support table with removable front section for leg down punching in angle or section
- Easily adjustable stripper & safety guard
Features
- Five work stations, Punching, Notching, Plate Shearing, Angle Iron Shearing and Bar Shearing (all stations are guarded)
- Dual hydraulic cylinders allows simultaneous operation without interference
- Punching capacity up to 50mm standard
- Mitre cutting of angle iron
- Magnetic base halogen lamp
- Hydraulic system is protected with replaceable filter cartridge
- Adjustable stroke for faster punching
- Curved shear blade for minimal job distortion
- Most cutting blades are four-sided for long life
- Punch, shear & notching table fitted with stops & guides as standard
- Two-pedal operation allows two people to work machine to greatly speed up production
- Large punch table with multi-purpose bolster, featuring a removable block for channel and beam flange punching
- Adjustable length stop with one-touch electronic backgauge for greater efficiency in repetitious work
Pre-Commissioning:
- Punch & Shear is run & tested prior delivery
- Hydraulic oil is included with machine
Specifications
| Model | IW-100S |
| Punching | |
| Punching Force | 100 Ton |
| Punch Capacity | ø28 x 26 |
| (Diameter x Thickness) | ø50 x 15 |
| Throat Depth (S) | 310 |
| Throat Depth (SD) | 510 |
| Max. Stroke Length | 100 |
| Cycles / Min. (20mm stroke) | 28 |
| Working Height Up to Die | 1044 |
| Angle Shearing | |
| At 90° Shearing | 150 x 150 x 15 |
| At 45° Miter Shearing | 75 x 75 x 9 |
| Working Height | 1216 |
| Flat Shearing | |
| Flat Bar Shear | 610 x 16 |
| (Width x Thickness) | 400 x 20 |
| Blade Length | 620 |
| Angle Flange Trim | 100 |
| Working Height | 954 |
| Bar Shearing | |
| Round Bar Shear | ø45 |
| Square Bar Shear | 45 x 45 |
| Channel Shear (H x B) | 150 x 75* |
| I Beam Shear (H x B) | 150 x 75* |
| Working Height | 1332 |
| Notching | |
| Rectangular Notcher (W x D x T) | 63.5 x 90 x 12 |
| Vee-Notcher (Side x Side x T) | 105 x 105 x 12* |
| Working Height | 954 |
Special Tooling
| Model | IW-100S |
| Large Vee-Notcher (Side x Side x T) | 145 x 145 x 12* |
| Single Vee Press Brake (W x T) | 250 x 15* |
| Multi Vee Press Brake (W x T) | 700 x 5* |
| Angle Bending | 100 x 100 x 13* |
| Pipe Notching | ø100* |
Others
| Model | IW-100S |
| Electric Power (HP) | 10 HP |
| Net Weight (Appr.) (S) | 2880 kg |
| Net Weight (Appr.) (SD) | 3340 kg |
| Gross Weight (Appr.) (S) | 3050 kg |
| Gross Weight (Appr.) (SD) | 3600 kg |
| Machine Dimension (Appr.) (S) (L x W x H) |
2100x860x1810 |
| Machine Dimension (Appr.) (SD) (L x W x H) |
2460x860x1810 |
| Packing Dimension (Appr.) (S) (L x W x H) |
2350x950x2100 |
| Packing Dimension (Appr.) (SD) (L x W x H) |
2700x1000x2060 |
