With an optional and constant bending radii and with very light deformation it is suitable to satisfy every requirement in the sectors operating in:

NOTE: Mandrel bending attachments are available in 3, 4, 5 and 6m lengths to suit this machine.

Spheroidal cast iron body on metal base.
3-phase 415vac 50 HZ asynchronous, self-braking motor, 2 speeds, 2,3/3,1 KW power.
Large range of tooling available – ordered separately
Digital electronic unit with a display to program and control the required bend angles. Memorises up to 70 bending programs with the possibility to store up to 6 bending angles in sequence in each program.
Automatic return to original starting point.
Low voltage electronic panel (24V).
180° maximum bending angle.
Equipped with quick counter former support position device and 2 interchangeable outlet shafts.
Dimensions: Length 810 mm, Width 400 mm, Height 1100 mm.
Weight: 210kg

Type of Pipe (Without Mandrel)	Ø (mm)	Wall Thickness (mm)
Hard & Soft Copper and Annealed Brass Pipes	60	4
Steel Pipes for Electrical Installations	60	2
AISI 304/316 Stainless Steel Pipes	60	3
Hydraulic Steel Tubes ST. 35.4	60	4
Furniture Tubes	60	3
FE Boiler Pipes	60	4
Aluminium Pipes	60	5
Gas Pipes UNI 5745	2″	Standard
Double Coated Aluminium Pipe	50 x 50	4
Standard Bending Radii	3D & 4D