Description

Kingsland Multi 95 Hydraulic IronWorker Manual

These universal machines are supplied with standard tooling including repetition support tables at punch, shear and notch stations and with easily adjusted holddowns at all five work stations to safely control the operations. Comprehensive safety guards are fitted as standard on all work stations.

Free standing on a suitable floor, they just require electrical connection to be ready for work. For two operator utilisation, the hydraulic system is activated by two shielded foot controls, one operating the punch end cylinder, the other operating the shear end cylinder. The shear cylinder provides the power to the three shearing and the notch stations. The system gives accurate power inching at all five work stations and allows the machine to e stopped at any position giving safe and accurate tool setting and work positioning. Limit switches at both ends of the machine control stroke length at all stations.

Centralised lubrication is metered by one-shot system, being only one feature of the low maintenance requirement. An optional ‘Production Pack’ is available to enhance the machine specification, this includes: 1 low volt halogen lamp on a movable magnetic base, 1.0m long touch and cut ruled length stop, fine adjustment facility to the punch stroke and measuring scales in the notch table.

Standard

Large punch table with multi-purpose bolster – removable table block for overhang channel /joist flange punching.
Punch table, shear table an notch table standard equipment
Non-tiltable and as thus wear-free-angle-cutting blades
Power inching and adjustable strokes at punch & shear end
Centralised pressure lubrication
Wide variety of applications – for large hole punching, crimping, tube notching, bar bending, sheet bending, punch press applications …
Large throat depth at the punching station –extra deep throat models available
Mitre cut flanges of angle under shear blade
Alternative rectangular / vee notching facility
Work station guards standard fitment
Two cylinder operation
Overload relief on hydraulic system
Interchangeable bearings, seals and valves readily available from stockists of hydraulic equipment.
Machines with very low maintenance
Punch adaptors
Swing away punch stripper unit
Easy change punch holder
Universal die bolster
Heavy-duty support tables with guides at shear station and notch station
Heavy-duty punch table with guides and backstop
Curved shear arm blade with 2 (optional:4) cutting edges
Shear body blade with 4 cutting edges
Section arm & body blade with 1 cutting edge
Angle cutting arm & body blades with 4 cutting edges
Rectangular notch bolster blades with 4 cuttings edges
Service toolkit
Work station guards
Instruction, operating and maintenance manual
Hydraulic oil fill

All Kingsland Multi Machines Include:

Independent Multi Cylinder Operation
5 Stations – Punch,
Shear, Notching, Angle,
Round & Square Bar.
10 Sets Of Punches & Dies of your choice
Special Non-Deform Shear Blade

Production Kit Includes

Touch & Cut
Halogen Work Light
Central Lubrication,
Fine Punch Adjustment
Punch Table And Back Stops

Specification:

Model	Multi 95
Punching
Rated Capacity	95 Ton
Maximum Capacity	27 x 25
Diameter x Thickness	57 x 12
Stroke Length	80
Cycle/Min (20mm Stroke)	34
Standard Throat Model	355
Deep Throat Model	625
Largest Hole ( Optional )	160
Maximum Section	305
Working Height	1039
Shearing
Flat Bar – Max Thickness	380 x 20
Flat Bar – Max Width	480 x 15
Angle Flange Trim – 45°	120 x 15
Working Height	890
Flat Bar – Max Thickness	380 x 20
Flat Bar – Max Width	480 x 15
Angle Cutting
90° Cut	150 x 15
45° Cut	80 x 10
Working Height	1155
Notching
Material Thickness	13
Width – Rectangle	52
Depth – Rectangle	100
Depth – Vee	70
Angle Flange – Max Profile	100 x 13
Working Height	890
Section Cutting
Round	50
Square	50
Channel	160 x 90
Tee	100 x 12