Cast Iron Body Coolant Pump

Size 1/8 HP
Flow Rate: 20 litres/min at 1000mm outlet height
Voltage Three Phase 415vac
Please specify after ordering
This coolant pump is a suitable replacement for many coolant pumps used on lathes, milling machines, grinders and other machinery.
The square mounting flange has 2 holes.
The centre to centre distance for the holes is 90mm. Hole diameter is 8mm.
A quick comparison with your coolant pump would determine if it’ll fit. Coolant output connection is NPT female 3/8″ pipe size.
Shaft length (the section immersed in coolant tank) is 130mm (6″).

No items found.