-
Blitzer Germany Premium Single Foot Pedal
The Blitzer Germany Premium Single Foot Pedal Guarded Footswitch features rugged die-cast aluminum housing, 10 A max permanent current, 500 V AC max voltage, slow make & break, and protection class IP 65.
$289.00 Excl. GST $317.90 Incl. GST Product ID: BLITZER-FPSFP -
Blitzer Bandsaw Blade Tension Meter
Calibrate bandsaw blade tension meter with ease and precision with this tension gauge that can measure in lb./in.2 and Kg./cm2. With the right bandsaw blade tension gauge, you can ensure optimal blade life as well as reduce the risk of machine damage due to over-tensioning.
$480.00 Excl. GST $528.00 Incl. GST Product ID: tnsion-gauge -
Blitzer Germany Premium Punch And Shear Foot Pedal
Multi stage / Two position foot pedal. For use with a large range of machinery.
$565.00 Excl. GST $621.50 Incl. GST Product ID: SP-BFPG -
Blitzer Dual Foot Pedal – Germany
Blitzer Dual Foot Pedal – Germany The Blitzer momentary contact guarded foot switch has double normally open and double normally closed as normal state configuration. It is red and made of aluminium. This foot switch has a rated insulation voltage of 400VAC, rated operational voltage of 240V and conventional thermal current of 10A.
$756.00 Excl. GST $831.60 Incl. GST Product ID: BLITZER-FOOT-PEDAL -
Blitzer NKO B10 ELECTRA Electronic Heavy-Duty Handheld Beveler
The Blitzer NKO B10 ELECTRA Electronic Heavy-Duty Handheld Beveler is a heavy-duty hand-held beveler that uses 6 indexable carbide inserts. The design allows straight edges, contours, and cutouts to be beveled with ease. works with steel, aluminum, copper, plastic, and other materials. The precision dial scale allows precise adjustment of the chamfer height. Replace the tool holder on demand for angles of 30°, 37.5°, 45°, 50°, and 60°. Ergonomic rotatable handle
$4,126.50 Excl. GST $4,539.15 Incl. GST Product ID: B10-EBBlitzer NKO B10 ELECTRA Electronic Heavy-Duty Handheld Beveler
$4,126.50 Excl. GST $4,539.15 Incl. GST -
Blitzer NKO B22 ZERO Electronic Heavy-Duty Handheld Beveler
The Blitzer NKO B22 ZERO Electronic Heavy-Duty Handheld Beveler can perform FACING (machining edges under an angle of 0°) to remove unwanted material layers after plasma or oxygen cutting. There are two models available: the Blitzer Beveler B22 240vac single phase and the Blitzer Beveler B22 415vac three phase. High-performance motor. Continuously adjustable working angle from 0° to 60°. The machine can perform “facing,” or machining edges under an angle of 0°, to remove an unwanted material layer after plasma or oxygen cutting. The compact and ergonomic design allows for high productivity while working. The work is more accurate because of the unique bevel size adjustment mechanism. A circumferentially protected frame protects the machine in the event of a fall and provides more options for gripping the machine while working. Beveled pipes and tubes up to Ø 600mm can be made with the tube accessory.
$5,218.00 Excl. GST $5,739.80 Incl. GST Product ID: B22-EB -
Blitzer NKO B15 AIR Pneumatic Hand Beveling Machine
Pneumatic Hand Beveler with huge power for straight edges, contours, boreholes, radius. This beveler is designed to bring a new high ergonomics design and huge power for every day beveling. Aluminum alloy body engine, Hardox support plate, milling head and inserts designed especially for hand beveler.
$5,236.00 Excl. GST $5,759.60 Incl. GST Product ID: Blitzer-PH-BM -
Blitzer 285 MG Gravity Feed Mitre Cutting Bandsaw 240v Single Phase
‘-Blitzer 285 MG Gravity Feed Mitre Cutting Bandsaw 240v Single Phase
$6,480.00 Excl. GST $7,128.00 Incl. GST Product ID: MG-285-BANDSAWBlitzer 285 MG Gravity Feed Mitre Cutting Bandsaw 240v Single Phase
$6,480.00 Excl. GST $7,128.00 Incl. GST -
Product ID: BLITZER-BLINEXTUBEPIPE -
Blitzer BG 440 DL Double Acting Portable Punching Unit & 240VAC Pump
The BLITZER BG 440 DL DOUBLE ACTING PORTABLE PUNCHING UNIT & 240VAC PUMP set features a punch diameter of up to 25mm and works with material thickness of up to 16mm. This set includes a control cable, hydraulic hose (5m), tools, depth fence,??suspension hook,??and one punch and die set (??22mm)
Product ID: BG440-DL-Set -
Blitzer Germany 17 Hydraulic Pump
The Afra SC 17 hydraulic pump is developed to drastically reduce the punching time, with its 1.5 l/min at 1370 rpm punching capacity and 750 bar / 10670 psi maximum pressure. It is also equipped with a powerful 1500w motor and oil quantity of up to 17L.
Product ID: SC-HYD-PMP -
Blitzer NKO B-DOCK + B15 ELECTRA SET Heavy-Duty Handheld Beveler
Dock station B-Dock enables the B15 ELECTRA SET Heavy-Duty Handheld Beveler to be used stationary. It is deigned for beveling small workpieces which would be hard or impossible to clamp and bevel the standard way. The system retains all advantages of the hand-held machine B15 ELECTRA SET Heavy-Duty Handheld Beveler. The B-Dock system makes it possible to bevel irregular shapes, straight workpieces and holes.Radiuses edges are also possible with the radius milling head.
Product ID: BLITZER-B15-BDOCK -
Blitzer NKO B-DOCK Station + B10 ELECTRA SET Heavy-Duty Handheld Beveler
Dock station B-Dock enables the B10 ELECTRA SET Heavy-Duty Handheld Beveler to be used stationary.
It is deigned for beveling small workpieces which would be hard or impossible to clamp and bevel the standard way.
The system retains all advantages of the hand-held machine B10 ELECTRA SET Heavy-Duty Handheld Beveler.Product ID: BLITZER-B10-BDOCK -
Blitzer NKO B15 ELECTRA Heavy-Duty Handheld Beveler
Blitzer NKO B15 ELECTRA Heavy-Duty Handheld Beveler designed for bevelling and deburring workpieces, internal and external radiuses and holes. Specially designed for producing bevels and welding preparation. Powerful electric drive for extreme loads.
$3,860.00 Excl. GST $4,246.00 Incl. GST Product ID: BLITZER-B15ELECTRA -
Blitzer NKO B2 AIR Pneumatic Hand-Held Deburring Beveling Machine
Deburring hand held system B2 AIR ( max width of deburring 2mm)
Intended for deburring and rounding of parts and workpieces made from steel, aluminium, stainless steel and other materials. B2 AIR deburrs holes from 6,8mm of inside diameter.
$2,624.00 Excl. GST $2,886.40 Incl. GST Product ID: BLITZER-B2AIRBlitzer NKO B2 AIR Pneumatic Hand-Held Deburring Beveling Machine
$2,624.00 Excl. GST $2,886.40 Incl. GST -
Blitzer NKO B3 Hand-Held Deburring Beveling Machine
The Blitzer NKO B3 Hand-Held Deburring Beveling Machine is intended for deburring and bevelling of the smaller steel workpieces. The workpieces are inserted directly into the machine and are guided manually.
$3,963.00 Excl. GST $4,359.30 Incl. GST Product ID: BLITZER-B3 -
Blitzer NKO B5 Hand-Held Deburring Beveling Machine
Blitzer NKO B5 Hand-Held Deburring Beveling Machine (max. width of bevel 5mm) For the deburring of outer and inner outlines, bevelling, milling of radius and bore holes as from 20 mm Ø. Especially developed to produce clean visible edges and to prepare welds.
Product ID: BLITZER-B5 -
Blitzer NKO Magnetic sweeper Mag Brush Maxx Large
Blitzer NKO Magnetic sweeper Mag Brush Maxx for practical cleaning of floors in various work areas
Product ID: BLITZER-MAGSWEEP -
Product ID: BLITZER-BGP75 -
Blitzer NKO UZ12 ULTRALIGHT Automatic Feed Beveling Machine
The UZ12 ULTRALIGHT is one of the lightest bevelling machines with the automatic feed in the market. Thanks to its compact size and low weight it is perfect not only for workshops but also for assemblies. The machine is equipped with the automatic feed. Working with UZ12 ULTRALIGHT is therefore very comfortable. The quietest bevelling system on the market.
Product ID: BLITZER-UZ12 -
Blitzer NKO UZ15 RAPID High speed 2 in 1 Beveling Machine + 3D Adaptive System
Blitzer NKO UZ15 RAPID Bevelers In One + 3D Adaptive System, Unique Bevelling Solution
Product ID: BLITZER-UZ15 -
Blitzer NKO UZ18 Double-Sided High-Speed Beveler
Double-Sided High-Speed Beveler UZ 18 HardWorker, variable angle adjustment (maximum bevel width 18 mm/0,70″. Automatic feed)
Product ID: BLITZER-UZ18 -
Blitzer NKO UZ29 SPEEDER Double Sided High Speed Beveling Machine
Blitzer NKO UZ29 SPEEDER Double Sided High Speed Beveling Machine is one of the largest and most powerful machines in the field of rotary cutting bevelling machines. The machine is equipped with an automatic feed and can be used as a stationary machine designed for large and small volumes of smaller workpieces, Maximum bevel width 29 mm / 1.14 in., Automatic feed, Bevel width18 mm / 0.7 in – in first cut by feeding speed 1.8 m/min. / 5.9 ft/min.
Product ID: BLITZER-UZ29 -
Blitzer NKO UZ30 Express Beveling Machine
Stationary UZ30 Plate Beveling Machine is one of the best solutions for bevelling large volumes of smaller and small workpieces or long, narrow steel strips. UZ30 can be used not only for bevelling, but also for deburring. Thanks to the unique geometry of the cutter the feed rate can be set up to the speed of 3.5 m/min. / 11.5 ft/min. For longer workpieces it is possible to equip the machine with an additional input and output table which extends the workspace to remarkable 2 824 mm / 111.18 in.
Product ID: BLITZER-UZ30 -
Blitzer NKO UZ50 TRIUMPH 3 in 1 Beveling Machine + 3D Adaptive System
Blitzer NKO UZ50 TRIUMPH 3 in 1 Beveling Machine + 3D Adaptive System is very efficient, unique double-sided beveling machine for steel, stainless steel, HARDOX, DOMEX and aluminium (max. width of bevel 62 mm).
Product ID: BLITZER-UZ50
All Products
- Home
- Air Compressors & Blasting Equipment
- Metal Cutting Saws
- Bandsaw and Cold Saw Blades
- Brobo Machinery
- Tooling & Blades
- Beveling Machines
- Conveyor Systems
- Coolants and Lubricants
- Engineering Machinery
- Forklift
- Hydraulic Tools and Lifting
- Drills Linishers & Belt Grinders
- Pipe and Bar Threaders
- Pipe, Tube & Bar Benders
- Punches and Dies Shear Blades
- Safety and Guarding
- Sheet Metal and Fabrication
- Spare Parts and Accessories
- Used Machinery
- Rebar Machinery
- Punching / Punch And Shears
- Welding Equipment
- Flange Facing Equipment
- Pages
- Request a Quote
- Resources
- Account
